OPTICAL FIBER SPLICE MECHANICAL CONNECTOR
Remarks:
1.Includes necessary accessories for installation kit with its respective transitions and protections. 2.Suitable for G.652D and G.657A with 900 micron and 3 mm 3.No special or additional tools required for connector assembly
Optical fiber connectors, optical fiber and optical fiber is removable (activities) of the connection between the device and the fiber of two surface precision docking it, so that the optical output of light energy to maximize the coupling to the receiving optical fiber, and optical link due to the intervention and to minimize the effects on the system, it is the basic requirement of optical fiber connector.To some extent, fiber optic connectors affect the reliability and performance of optical transmission system.
SC/APC | ||
1: Application | 2.0MM*3.0MM drop cable | |
2:Application Environment | -40℃~+85℃ | |
3: Operation time | About 10second | |
4: Optical property | ||
Insertion Loss | Test with standard connector and adapter: ≦0.3dB | |
Test with any connector and adapter: ≦0.5dB | ||
Return loss | ≥50dB(UPC),≥60dB(APC) | |
5:Passive Optical Components | ||
Insertion Loss | ≦0.2dB | |
Return loss | ≥40 dB | |
Interchangeability | ≦0.2dB | |
tensile strength test | ≦0.1dB(0-15Hg,except φ0.9mm) | |
Vibration test | ≦0.1dB(10-60Hz,1.5mm amplitude) | |
6:Factory-Installed Termination System | ||
Insertion Loss | ≤0.3 dB | |
Return loss | ≥50dB(UPC),≥60dB(APC) | |
7: Parameter of Connector End Face 3D: | ||
Contact pin(mm) | 2.5 | |
Radius of curvature(mm) | PC/UPC: 10~25, APC: 5~15 | |
Apex offset(um) | ≦50 | |
Fiber height(nm) | -100~+50 | |
Degree of APC(°) | 8+-0.2 | |
8:Environmental performance | ||
Temperature cycle | -40℃~+85℃, 21 cycles and 168Hrs, the Insertion loss variation ≦0.3dB | |
Low temperature | -40℃, within 96hrs, the Insertion loss variation ≦0.3dB | |
High temperature | 85℃, within 96hrs, the Insertion loss variation ≦0.3dB | |
Immerse | Indoor temperature, within 168hrs, the Insertion loss variation ≦0.3dB | |
No epoxy adhesives, no fiber polishing | ||
9:Mechanical property | ||
Vibration | Frequency: 10-50Hz, Frequency Sweep:45 times/1min, Amplitude: 0.75mm | |
Time: each 2hours to 3 point: the Insertion loss variation ≦0.3dB | ||
Fall off | Height: 1.5M, Times: 8times, the Insertion loss variation ≦0.3dB | |
Tensile resistance | 0.125mm:4N, Do not monitor optical performance online | |
Cable:20N:On-line monitoring of optical performance | ||
Repeatable assembly performance | 5 times:the Insertion loss variation ≦0.3dB | |
Mechanical durability | Insert and Draw Frequency:500 times,the Insertion loss variation ≦0.3dB | |
Repeatability | Insert and Draw Frequency:10 times,the Insertion loss variation ≦0.3dB | |
length | 9*60MM | |
Remarks: 1, Includes necessary accessories for installation kit with its respective transitions and protections.
2, Suitable for G.652D and G.657A with 900 micron and 3 mm 3, No special or additional tools required for connector assembly |
Aggressive competitive price
15years experience sales team and engineer team support
Flexible incoterms Ex-works FOB FCA CIF CIP DDU DDP etc
The best and fastest shipping vessel route selection to receive the goods in the fastest time
Combined shipped is accepted if need we are your warehouse in China
Completely Ftth solution products providing if need
OEM ODM are available
Jiahome is proud to offer a warranty on all of our cables as well as on most of our other products. The warranty for each product is Our company makes the following commitments :
We guarantee that the goods are brand new, unused and genuine products that fully meet the quality, specifications and performance requirements specified in the contract.
We guarantee that the goods should have reliable performance under the conditions of correct installation, use, storage and maintenance.
If the delivered goods are found to be short-packed, defective, damaged or otherwise inconsistent with the provisions of this contract during acceptance, the buyer should make detailed on-site records, or the buyer and seller should sign a memorandum. This field record or memorandum can be used as valid evidence for additions, missing and replacement of damaged parts. The related expenses arising therefrom shall be borne by the seller
If it is found that the configuration does not meet the requirements, the appearance is damaged, deformed, or any quality problems due to defects in design, workmanship or materials are found, the buyer is responsible for the non-conforming product and has the right to request a return or replacement.