Armored Fiber Optic Cable GYXTC8S FIG 8 UNITUBE SO2 9/125 4-12CORE

armored fiber optic cable is commonly used in situations where both high performance and robust physical protection are required, such as in outdoor telecommunication networks, industrial installations, or environments where the cable may be exposed to physical stress.

1.GYXTC8S FIG 8 UNITUBE Structure:

• Central Strength Member: A central element, usually made of steel or FRP (Fiber Reinforced Plastic), provides tensile strength.
• Loose Tubes: The optical fibers are housed in loose tubes, typically filled with a gel to protect against moisture.
• Water-blocking Material: Materials are used to prevent water ingress.
• Armored Layer: The armor, usually a corrugated steel tape or steel wire, adds protection against physical impacts, compression, and rodents.
• Outer Sheath: Typically made from polyethylene (PE) or other UV-resistant materials, providing protection against environmental factors.

2. SO2 9/125 4-12CORE Applications:

• Telecommunications: Used for high-speed data transmission over long distances.
• Outdoor Installations: Ideal for use in outdoor environments, including direct burial and aerial installations.
• Industrial Environments: Suitable for areas where additional protection is needed due to harsh conditions or rodent activity.

3. Armored Fiber Optic Cable Advantages:

• Durability: The armored design protects the fibers from environmental and physical damage.
• Flexibility: With a range of 4 to 12 fibers, this cable can be tailored to meet specific network requirements.
• High-Performance Transmission: The single-mode fibers allow for high-speed, long-distance communication with minimal signal loss.

In the GYXTC8S cable,single-mode/multimode fibers are positioned in the loose tube, which is made of high modulus plastic materials and filled with filling compound.PSP is longitudinally applied around the loose tube, and water-blocking materials are distributed into interstices of it.Then.this part of cable accompanied with the stranded wires as the supporting part are completed with a PE sheath to be a figure-8 structure.